Paper Cup Sizes Explained: A Sizing Guide for Coffee, Bubble Tea and Takeaway Drinks

Paper Cup Sizes Explained: A Sizing Guide for Coffee, Bubble Tea and Takeaway Drinks

Ordering paper cups looks simple until you have to specify one. "A 12oz coffee cup" does not tell a factory which cup you mean, because the capacity label only describes the volume — not the shape. Two 12oz cups from two suppliers can have completely different diameters, and the lid that fits one will not fit the other.

This guide uses our own catalogue measurements so you can specify a cup precisely the first time, and avoid the most common and expensive mistake in cup sourcing: a lid that does not seal.

What a cup size actually describes

Every paper cup is defined by four numbers. Get all four right and the cup is unambiguous:

  • Top diameter — what the lid grips. This is the number that matters most for lids.
  • Bottom diameter — affects how the cup sits in a holder, a sleeve and a stacking system.
  • Height — determines whether it fits under your espresso machine spout, and into your cup carrier.
  • Capacity — what your customer sees on the menu.

Notice the pattern in our range: cup models are named by their top diameter, not their volume. A "90 - 12oz" and an "80 - 12oz" hold the same drink but take different lids and different sleeves.

Single wall paper cups

Single wall is the everyday option: one layer of food-grade board with a PE or PLA lining. Best for cold drinks, iced coffee, juice and any drink served without a sleeve.

Single wall paper cups — full size chart
Cup model Top diameter Bottom diameter Height Packing QTY
3oz 50 mm 50 mm 35 mm 1,000 pcs / carton
4oz 60 mm 45 mm 60 mm 5,000 pcs / carton
7oz 70 mm 54 mm 73 mm 2,000 pcs / carton
9oz 75 mm 54 mm 88 mm 2,000 pcs / carton
80 - 8oz 80 mm 60 mm 95 mm 1,000 pcs / carton
80 - 12oz 80 mm 54 mm 114 mm 1,000 pcs / carton
90 - 8oz 90 mm 60 mm 84 mm 1,000 pcs / carton
90 - 10oz 90 mm 60 mm 95 mm 1,000 pcs / carton
90 - 12 / 14oz 90 mm 60 mm 111 mm 1,000 pcs / carton
90 - 16oz 90 mm 60 mm 136 mm 1,000 pcs / carton
90 - 20oz 90 mm 60 mm 158 mm 1,000 pcs / carton
90 - 22oz 90 mm 60 mm 160 mm 1,000 pcs / carton
95 - 24oz 95 mm 90 mm 171 mm 500 pcs / carton
32oz 105 mm 70 mm 180 mm 500 pcs / carton

Double wall paper cups

Double wall adds a second layer of board, which creates an insulating air gap. The outside stays comfortable to hold on a hot drink, so you can skip the cardboard sleeve — one less item in the order and one less step for your staff.

Compare the capacities: our double wall range tops out at 22oz where the single wall range goes to 32oz, and the 90-series double wall cups pack 500 per carton rather than 1,000 because each one takes more space.

Double wall paper cups — full size chart
Cup model Top diameter Bottom diameter Height Packing QTY
4oz 63 mm 60 mm 45 mm 2,500 pcs / carton
80 - 8oz 80 mm 60 mm 95 mm 1,000 pcs / carton
80 - 12oz 80 mm 63 mm 110 mm 1,000 pcs / carton
90 - 8oz 90 mm 60 mm 84 mm 500 pcs / carton
90 - 10oz 90 mm 60 mm 95 mm 500 pcs / carton
90 - 12 / 14oz 90 mm 60 mm 111 mm 500 pcs / carton
90 - 16oz 90 mm 60 mm 136 mm 500 pcs / carton
90 - 20oz 90 mm 60 mm 156 mm 500 pcs / carton
90 - 22oz 90 mm 60 mm 160 mm 500 pcs / carton

Corrugated and speciality walls

Beyond single and double wall, we produce corrugated (ripple) wall cups for premium hot beverages and speciality finishes — UV varnish, hot foil stamping, embossing and digital print — for brands that want the cup itself to carry the identity rather than a sleeve.

Matching the lid

Lids are sized in millimetres and must match the top diameter:

  • 74 mm and 78 mm — small PET cold cups, 3oz to 10oz.
  • 90 mm — the most common hot and cold cup in our range, 8oz to 22oz.
  • 95 mm and 98 mm — large cold cups and bubble tea, up to 24oz.

Lid type matters as much as size. A flat lid suits a hot coffee; a dome lid gives whipped cream and boba room; a U-shape cup takes a U-shape lid. For hot drinks choose a sip lid, and remember that a compostable cup paired with a plastic lid weakens the claim you can make to your customers.

Packing quantity is a freight decision

Look at the last column of the tables above. A 90 – 16oz single wall cup packs 1,000 per carton; a 32oz cup packs 500. That difference changes your freight cost per unit, the size of the pallet you need, and how much storage your back room has to give up.

If you are comparing two suppliers on unit price alone, convert to landed cost per cup: unit price, plus carton cube, plus cartons per pallet, plus the lid.

Customisation and order quantity

All of our cups are printable in flexo or offset with full-colour custom design. Most items start from 3,000 to 5,000 pcs, and the MOQ is confirmed against your exact specification — wall type, size, printing method and lid. Sampling typically runs 7 to 10 days, and OEM or ODM production takes 7 to 25 days after the artwork is approved.

Send us your menu, your volumes and the drink you are serving and we will come back with a specification rather than a guess.

Back to blog